Commercial · light industrial
Commercial HVAC
If you run a business and want to cut energy costs and your carbon footprint, heat pumps are a cost-effective way to heat and cool a commercial space. We design systems around how your building is actually used, install with minimal disruption and keep them running.
- Multi-zone
- VRF-style systems with independent zones
- 3-phase
- Electrical handled by our own Red Seal team
- Off-hours
- Installation scheduled around your business
Sound familiar?
Why business owners call us
Energy costs eating the margin
Heating a busy commercial space with oil or electric resistance is expensive. Heat pumps are a cost-effective way to heat and cool it, and cut your carbon footprint.
Rooftop units at end of life
Replacing tired equipment with a modern heat pump plant is the moment to right-size zones and stop heating empty rooms.
Tenants too hot and too cold
Independent zones with their own setpoints end the thermostat wars in offices, clinics and mixed-use buildings.
Drag to rotate · tap a number
On the roof
Anatomy of a commercial heat pump system
One rooftop plant, many independently controlled zones, and the electrical work handled by the same crew.
Buildings we serve
Designed around how your space is actually used
Occupancy, hours, heat-producing equipment and future plans all shape the design. One size never fits all.
- 01
Retail and showrooms
Even comfort across large open floors with quiet ceiling cassettes or ducted units, and cooling for summer crowds.
Best for: Shops, showrooms, dealerships
- 02
Offices and clinics
Many small zones with independent control, low noise and good filtration.
Best for: Professional offices, medical and dental clinics
- 03
Restaurants and food service
Systems that cope with kitchen heat and dining-room comfort at the same time, with maintenance planned around service hours.
Best for: Restaurants, cafés, bakeries
- 04
Multi-unit residential
Individual comfort for each unit with shared outdoor plant, and electrical capacity planned for the whole building.
Best for: Apartment buildings, condos, mixed-use
- 05
Warehouses and shops
Efficient heating for high-bay spaces and workshops, with durable equipment and simple controls.
Best for: Warehouses, garages, light industrial
Step by step
How a commercial project goes
Consultation-led, phased to keep you open, and maintained afterwards.
- 1
Site survey and load assessment
We walk the building with you, review hours and occupancy, measure the spaces and check the electrical service.
- 2
Design and itemized proposal
Zones, equipment selection, electrical scope and a schedule, in a proposal you can compare line by line.
- 3
Phased installation
Evenings, weekends or in stages so the business keeps running. Our electricians handle 3-phase work in the same programme.
- 4
Commissioning and maintenance
Controls training, documentation, and a planned maintenance agreement with priority response.
From our technicians
Straight talk about commercial heat pumps
What to expect when you move a business off oil or resistance heat.
- 01
Cost-effective heating for busy spaces
If you want to cut energy costs and your carbon footprint, heat pumps are an excellent, cost-effective solution for heating a busy commercial space.
- 02
Winter performance
Cold-climate commercial systems are designed for this climate, and can be paired with existing heating for the coldest days where needed.
- 03
One contractor, two trades
Commercial installs usually need 3-phase feeds, new disconnects or panel capacity. Because our electricians are part of the team, one schedule covers everything.
- 04
Minimal disruption
We plan the work around your hours and keep the site clean and safe throughout.
- 05
Maintenance is where the savings live
Scheduled service keeps systems efficient, extends equipment life and gives you priority response when something fails.
- 06
Start with a consultation
Tell us about the building and we will tailor a system to your commercial needs, with an experienced commercial HVAC technician leading the design.
Is it right for you?
Lower operating costs for busy commercial spaces.
- Retail, offices, restaurants and clinics
- Multi-unit residential and small apartment buildings
- Warehouses, shops and light-industrial units
- Property managers who want one contractor for HVAC and electrical
- 01
Consultation-led design
We start with how the space is used — occupancy, hours, heat-producing equipment — and size zones so you are not heating empty rooms.
- 02
Multi-zone and VRF-style systems
One outdoor system can serve many indoor zones with independent control, ideal for offices and mixed-use buildings.
- 03
3-phase electrical in-house
Commercial installs often need 3-phase service work, new disconnects or panel capacity. Our Red Seal electricians handle it as part of the same project.
- 04
Planned maintenance
Scheduled service agreements keep systems efficient, extend equipment life and give you priority response when something fails.
What's included
Everything, itemized.
No vague line items. This is what a typical project with us covers.
- Site survey and load assessment
- System design, equipment selection and itemized proposal
- Installation scheduled around your operating hours
- 3-phase electrical, disconnects and panel work
- Commissioning, controls training and documentation
- Preventive maintenance agreements
Recent work
From our job sites.
Real installations across Nova Scotia, photographed by our own crew.
Commercial heat pump units on the rooftop of a Halifax business at dusk 
New electrical panel with surge protection and disconnect 
Multi-zone outdoor unit installed on a stand
What our clients say
Comfort you can feel. Service you remember.
The service from Smart Heat Pumps was impeccable! Their technicians were knowledgeable and efficient, transforming our home's comfort level in no time.
I highly recommend Smart Heat Pumps. Their dedication to customer satisfaction and quality solutions is evident in their work and the results.
Common questions
About commercial HVAC
If yours isn't here, call — a technician will answer it.
Can heat pumps really heat a commercial building in winter?
Yes. Cold-climate commercial systems are designed for exactly this, and can be paired with existing heating for the coldest days where needed.
Will installation disrupt my business?
We plan work around your hours — evenings, weekends or in phases — and keep the site clean and safe throughout.
Do you offer service contracts?
Yes. Planned maintenance agreements with scheduled visits and priority response are available for all commercial systems.
More from Smart
Other ways we can help
- Ductless Mini-Split Heat PumpsSingle- and multi-zone systems for homes without ductwork.
- Ducted & Central Heat PumpsWhole-home air handlers that use your existing ducts — including oil-furnace conversions and add-on heat pumps that pair with your furnace.
- Heat Pump Repair & MaintenanceDiagnostics, repairs and preventive tune-ups that keep any heat pump running efficiently through Nova Scotia winters.
- Electrical ServicesRed Seal electricians for panel and service upgrades (100 → 200/400 A), generator systems, lighting, hot tubs, HVAC wiring and new construction.
- HRV / ERV Installation & MaintenanceHeat and energy recovery ventilators that swap stale indoor air for fresh air — without throwing away the heat you paid for.
Start your comfort journey
Get a free, no-pressure quote for your home or business.
Tell us a little about your place and we'll arrange a visit, size the right system and show you exactly what it costs after rebates.
- Call or text902-220-4182
- Emailinfo@smarteheatpumps.com
- Service areaAll of Nova Scotia